Washing machine faucet Install washing machine faucet

Faucet is a daily necessities, people will have close contact with the water dragon every day, at least several times, as many as several dozen times, we can see the closeness of this small necessities and people's lives! So, how to install a washing machine dedicated faucet washing machine dedicated faucet and how to buy it? Let's take a look with Xiaobian.

Washing machine faucet installation

How to install a washing machine faucet? The following is a simple way to install a washing machine tap:

1. First introduce the standard washing machine inlet pipe. When you get the washing machine inlet fittings, don't rush to the washing machine faucet. Let's split it up first. Hold the white part and the blue part of the joints with both hands and press the blue part down. In two parts;

2. At this time, everyone can see that the white part of the tube connector is actually very similar to the nozzle of the washing machine tap, and then the faucet is ready. Insert the nozzle of the washing machine faucet into the fitting of the washing machine. It is not inserted here. We will press down the blue part until we insert the entire faucet into it. Then let it go, and let the faucet and the washing machine faucet It's OK.

After checking it up, check it again, no problem with the boiled water test, it is so simple, for friends who need to install washing machine faucet may wish to refer to the next.

Washing machine faucet purchase

1, turn the handle: feel light valve is good

Common faucet spools have steel ball spools and ceramic spools. Steel ball valve core has a good anti-pressure capability, but the disadvantage is that the rubber sealing ring from the sealing effect is easy to wear and will soon be aging. Compared with the steel ball valve core, the ceramic valve core is more heat-resistant and wear-resistant. At the same time, the ceramic valve core itself has good sealing performance, so it can achieve a high resistance to opening times, and will not cause water nozzle leakage due to valve core wear. Ceramic faucet, feel more comfortable, smooth, and open and close quickly. Since the valve plug is inside the faucet, the consumer cannot see the valve plug when purchasing, but the consumer can easily judge the quality of the valve plug based on the feel of the rotating handle. In general, turning the handles up, down, left, and right, if you feel light, no sense of blockage, it means that the valve core is better.

2, look at the appearance: plating to be bright as a mirror

After the faucet is polished and cast, the surface should be plated with nickel or chromium to prevent oxidation of the faucet. After the nickel or chromium plating, a medium-sized hydrochloric acid test is performed on the faucet. After the test, the plating layer should be free of rust during a certain period of time. It is understood that only the faucets that pass the neutral salt spray test can be delivered. When consumers purchase, it is best to place the faucet in a well-lit place. The surface of the faucet should be bright as a mirror, without any oxidation spots, scorch marks, no air holes, no blistering, no leakage plating, and uniform color; The hands are free of burrs and grit. After pressing the tap with a finger, the fingerprints quickly spread out and the dirt is not easily attached.

3, to test: quality is more assured

The faucet body is generally brass. The quality of the plating product made of brass can be guaranteed to be the highest. The higher the purity of the brass is, the better the plating quality is, and the less plating layer on the surface is less likely to be corroded. Some manufacturers use zinc alloy instead of brass in order to reduce costs. Although the state allows the use of zinc alloy instead of brass, the quality of zinc alloy plating is poor and corrosion resistance is not strong. In general, consumers can use the method of estimating the weight when purchasing. The brass is heavier and harder, and the zinc alloy is lighter and softer. Experts advise that the quality of faucets should not be judged by their weight alone, because some manufacturers can also make the faucets heavier by increasing the wall thickness of faucets or adding other metal materials. Consumers are advised to ask the sales staff for a test report of the product. If the test report says that the product is qualified, the problem is not serious.

4, test flow: the foam is rich

Consumers should choose a faucet with a bubbler as far as possible, and feel the water flow with their hands. The water flow is soft and foamy (water bubble content), indicating that the bubbler quality is better. The bubbler generally consists of six layers, usually consisting of a metal mesh cover (partly plastic). When the water passes through the mesh cover, it will be cut into a large number of tiny water columns with air interposed between them, so that the water will not be torn apart.

5, recognize the brand: after-sales service is guaranteed

Finally, consumers should go to the formal market and supermarkets to purchase branded taps. Branded products have manufacturer's brand identity, and non-regular products or quality products are often only pasted with some paper labels, even without any mark. The faucet packing box should also have the manufacturer's brand identity, quality assurance and after-sales service. When buying, be sure to look for it.

The above information about washing machine faucet installation and washing machine faucet purchase is briefly introduced here, and I hope to help you. For more information, please visit this website. Stay tuned.

Washing machine faucet